| Content | Built to provide quick and efficient tape wrapping control over various sized boxes, packages, and other items, this heavy-duty 2"W tape dispenser has a natural rubber roller to hold tape in place while dispensing. Product Specifications- BRAN: DGlobal Industrial™
- TAPE WIDTH INCHES: 2
- WEIGHT LBS: 1.1
- COLOR: Blue/Gray
- ASSEMBLY: Assembled
- CONSTRUCTION: Plastic, Rubber
- TYPE: Handheld Dispenser
- PACKAGE QUANTITY: 1
- MANUFACTURERS PART NUMBER: 795451
- TAPE MAX WIDTH INCHES: 2
- TAPE MIN WIDTH INCHES: 1
- FRAME CONSTRUCTION: Plastic
- BLADE CONSTRUCTION: Steel
- HANDLE CONSTRUCTION: Plastic
- STYLE: Heavy Duty
| Flotec Thermoplastic Sprinkler Pump 1 HP Corrosion-resistant, self priming sprinkler pumps are constructed of rugged, heavy-duty fiberglass-reinforced thermoplastic and capable of operating up to 30 sprinkler heads. Key Features:- Superior performance at depths to water of 20' or less
- Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
- Ready-to-install 230 volt motor (dual voltage)
- Self-priming after pump housing is initially filled (Check Valve or Foot Valve required)
Product Specifications- BRAND:Flotec
- MANUFACTURERS PART NUMBER: FP5162-08
- LENGTH INCHE:22
- WIDTH INCHES: 12.313
- HEIGHT INCHES: 13.125
- WEIGHT LBS: 30.6
- COLOR FINISH: Black
- CONSTRUCTION: Thermoplastic
- SHAFT SEAL CONSTRUCTION: Silicone Carbide
- AMPS: 15/20
- HERTZ: 60
- PHASE: 1
- VOLTAGE: 230/115
- HORSEPOWER: 1
- GALLONS PER MINUTE: 55
- SUCTION/DRAW HEAD FEET: 25
- CORD LENGTH FEET: 10
- DISCHARGE CONNECTION TYPE: NPT
- SWITCH TYPE--
- INCLUDES: Threaded Ports For Pressure Gauge
- DISCHARGE CONNECTION SIZE INCHES: 1-1/2
- WARRANTY: 1 Year Limited
| Industrial Water Transfer Pump BE Pressure 3" Commercial water transfer pump was built to move large volumes of water while smooth running and long lasting. Used for draining a pool, Irrigating lawn, filling or emptying resevoirs, emptying a flooded basement and much more in no time. Our pump has a 3-Inch MNPT intake & 3-inch outlet connection. It is run by a strong Honda GX200 engine and has a max flow of 264 GPM. Discharge Hose Kits Sold Seperately.- GX200 Honda Engine (6.5)
- Recoil Start
- Fuel Tank Capacity, 0.82. GAL. (3.1L)
- 3" Intake Connection MNPT
- 3" Outlet Connection MNPT
- 264 GPM
- Centrifugal Aluminum Pump
- Heavy Duty Cast Iron Impeller
- 1 Year Pump Warranty
- 3 Year Engine Warranty
Product Specifications- BRAND:BE Pressure
- MANUFACTURERS PART NUMBER:WP-3065HL
- TYPE: Water Pump
- DISCHARGE HEAD FEET: 106
- INLET CONNECTION INCHES: 3
- MAXIMUM DIAMETER SOLIDS INCHES: No Solids
- IMPELLER MATERIAL: Heavy Duty Cast Iron
- HORSEPOWER: 6-1/2
- FUEL TANK CAPACITY GALLONS: 0.82
- GALLONS PER MINUTE: 265
- SUCTION/DRAW HEAD FEET: 26
- DISCHARGE CONNECTION TYPE: MNPT
- ENGINE: Honda GX200 160CC
- FUEL TYPE: Gasoline
- INLET CONNECTION TYPEMNPT
- STYLE: Water
- DISCHARGE CONNECTION SIZE INCHES: 3
- MODEL: 300846
| Apache 98138054 2" x 100' PVC Lay Flat Discharge Hose w/ M x F Aluminum Short Shanks Features:- PVC tube/cover reinforced with 3 ply polyester yarns (one longitudinal and two spiral plies), extruded simultaneously to obtain maximum bonding
- Resistant to oils, grease, many chemicals and acids
- Strong, lightweight non water-absorbing and mildew-proof hose that rolls up flat for easy storage
- Coupled with Male x Female aluminum short shanks with Band-It®clamps
Product Specifications Product Specifications LENGTH FEET: 100 WIDTH INCHES: 1/2 COLOR FINISH: Blue BRAND: Apache Hose & Belting CONNECTION TYPE: M x F Alum Short Shank CONSTRUCTION: PVC DESCRIPTION: Hose W/Connections DIAMETER INCHES: 2 MANUFACTURERS PART NUMBER: 98138054 PSI: 70 STOCK TYPE Stock | Devcon 5 Minute® Epoxies Product Details: Rapid-curing, general-purpose adhesive/encapsulant
Bonds rigid, durable substrates, including glass, metal, ceramics, concrete and wood.
Forms a clear, hard bond self-leveling liquid in minutes
100% reactive, no solvents
Easily dispenses and mixes in seconds
Dries in 15 minutes, reaches functional strength in 1 hour
Good solvent resistance Testing and Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure; Cured hardness tested according to ASTM D-2240; Cured density tested according to ASTM D1002; Compression strength tested according to ASTM D695; Dielectric strength tested according to ASTM D149| Specifications | | Adhesive Tensile Shear | 1,400 psi | | Applicable Materials | Most Metals; Fabric; Ceramic; Glass; Concrete; Woo | | Applications | Multi-Purpose | | Big Catalog Page# | 2012:167 | | Brand | DEVCON | | Capacity Vol. [Nom] | 25 mL | | Chemical Compound | Epoxy | | Color | Light Amber | | Country of Origin | US | | Dielectric Strength | 490 V/mil | | Fix Cure Time @ Temp. | 1 h @ 75 °F | | Full Cure Time @ Temp. | 16 min @ 75 °F | | Gap Fill [Nom] | 1/4 in | | Hardness [Nom] | 85 Shore D | | Hazmat | NO | | MPI Catalog | YES | | MPI Catalog Page# | 2021:56 | | ORMD | NO | | Packing Type | Dev-Tube™ | | Prop 65 | NO | | Resistance | Kerosene; Sulfuric Acid-10%; Toluene; Hydrochloric | | Special Order | NO | | Temp. Range [Max] | 200 °F | | Temp. Range [Min] | -40 °F | | UNSPSC | 31201600 | | Viscosity [Nom] | 10,000 cP | | Working Time [Max] | 6 min | | Working Time [Min] | 3 min | | Working Time [Nom] | 3-6 min | | Wt. | 0.17 lb |
| Cardboard Corrugated Boxes 6" x 6" x 6" 200#/ECT-32 - 25 Pack Cube boxes disburse product weight evenly for easier stacking.- Use this popular size cube box to package cylindrical, round or odd shaped products
- Manufactured from 200#/ECT-32 kraft corrugated
- Sold and shipped flat in bundle quantities of 25
Product Specifications- BRAND: Approved Vendor
- INSIDE LENGTH INCHES: 6
- INSIDE WIDTH INCHES:6
- INSIDE HEIGHT INCHES:6
- COLOR FINISH: Kraft
- MATERIAL: C Flute
- PACKAGE QUANTITY: 25
- BOX STYLE: Regular Slotted
- WALL TYPE: Single
- TYPE: Corrugated Boxes – Best Value
- STRENGTH: 200# / ECT-32
- WEIGHT CAPACITY: 65 lbs
|
Reviews
There are no reviews yet.