Content | Flotec Thermoplastic Sprinkler Pump 1 HP Corrosion-resistant, self priming sprinkler pumps are constructed of rugged, heavy-duty fiberglass-reinforced thermoplastic and capable of operating up to 30 sprinkler heads. Key Features:- Superior performance at depths to water of 20' or less
- Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
- Ready-to-install 230 volt motor (dual voltage)
- Self-priming after pump housing is initially filled (Check Valve or Foot Valve required)
Product Specifications- BRAND:Flotec
- MANUFACTURERS PART NUMBER: FP5162-08
- LENGTH INCHE:22
- WIDTH INCHES: 12.313
- HEIGHT INCHES: 13.125
- WEIGHT LBS: 30.6
- COLOR FINISH: Black
- CONSTRUCTION: Thermoplastic
- SHAFT SEAL CONSTRUCTION: Silicone Carbide
- AMPS: 15/20
- HERTZ: 60
- PHASE: 1
- VOLTAGE: 230/115
- HORSEPOWER: 1
- GALLONS PER MINUTE: 55
- SUCTION/DRAW HEAD FEET: 25
- CORD LENGTH FEET: 10
- DISCHARGE CONNECTION TYPE: NPT
- SWITCH TYPE--
- INCLUDES: Threaded Ports For Pressure Gauge
- DISCHARGE CONNECTION SIZE INCHES: 1-1/2
- WARRANTY: 1 Year Limited
| 2-inch Honda Water Pump FeaturesWater Pump 2 Inch Intake/Outlet 6.5 HP Honda Engine This 2-inch Honda Water Pump has an automatic low oil shutdown guard. Heavy-duty, corrosive-resistant seals. Durable cast iron impeller.Product Specifications- BRAND: BE Pressure
- MANUFACTURERS PART NUMBER: WP-2065HL
- TYPE: Water Pump
- DISCHARGE HEAD FEET: 105
- INLET CONNECTION INCHES: 2
- MAXIMUM DIAMETER SOLIDS INCHES: No Solids
- IMPELLER MATERIAL: Heavy Duty Cast Iron
- HORSEPOWER: 6-1/2
- CAPACITY GALLONS: 0.82
- FUEL TANK CAPACITY GALLONS: 0.82
- GALLONS PER MINUTE: 150
- SUCTION/DRAW HEAD FEET: 26
- DISCHARGE CONNECTION TYPE: MNPT
- ENGINE: Honda GX200 196CC
- INLET CONNECTION TYPE: MNPT
- STYLE: Water
- DISCHARGE CONNECTION SIZE INCHES: 2
- MODEL:300843
| Mirrors Boxes 30" x 3-1/2" x 40" 200#/ECT-32 - Four 30" x 40" Pieces per Set These boxes were designed to create a "custom fit" for mirrors and other glass products.- Four pieces are required to create a complete carton - Pricing is per piece
- Panels feature "Fragile", "Handle with Care" and "Do Not Lay Flat" messages
- Manufactured from 200#/ECT-32 kraft corrugated
- Shipped flat and sold in bundle quantities of 4
Product Specifications- BRAND: Approved Vendor
- INSIDE LENGTH INCHES: 30
- INSIDE WIDTH INCHES: 3-1/2
- INSIDE HEIGHT INCHES: 40
- COLOR FINISH: Kraft
- MANUFACTURERS PART NUMBER: 30404PCMC
- MATERIAL: C Flute
- PACKAGE QUANTITY: 4
- WEIGHT LBS: 1.000
- WALL TYPE: Single
- TYPE: Specialty Moving Boxes
- STRENGTH: 200# / ECT-32
- WEIGHT CAPACITY: 65 lbs
- FOR USE WITH: Mirrors
| Devcon 5 Minute® Epoxies Product Details: Rapid-curing, general-purpose adhesive/encapsulant
Bonds rigid, durable substrates, including glass, metal, ceramics, concrete and wood.
Forms a clear, hard bond self-leveling liquid in minutes
100% reactive, no solvents
Easily dispenses and mixes in seconds
Dries in 15 minutes, reaches functional strength in 1 hour
Good solvent resistance Testing and Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure; Cured hardness tested according to ASTM D-2240; Cured density tested according to ASTM D1002; Compression strength tested according to ASTM D695; Dielectric strength tested according to ASTM D149Specifications | Adhesive Tensile Shear | 1,400 psi | Applicable Materials | Most Metals; Fabric; Ceramic; Glass; Concrete; Woo | Applications | Multi-Purpose | Big Catalog Page# | 2012:167 | Brand | DEVCON | Capacity Vol. [Nom] | 25 mL | Chemical Compound | Epoxy | Color | Light Amber | Country of Origin | US | Dielectric Strength | 490 V/mil | Fix Cure Time @ Temp. | 1 h @ 75 °F | Full Cure Time @ Temp. | 16 min @ 75 °F | Gap Fill [Nom] | 1/4 in | Hardness [Nom] | 85 Shore D | Hazmat | NO | MPI Catalog | YES | MPI Catalog Page# | 2021:56 | ORMD | NO | Packing Type | Dev-Tube™ | Prop 65 | NO | Resistance | Kerosene; Sulfuric Acid-10%; Toluene; Hydrochloric | Special Order | NO | Temp. Range [Max] | 200 °F | Temp. Range [Min] | -40 °F | UNSPSC | 31201600 | Viscosity [Nom] | 10,000 cP | Working Time [Max] | 6 min | Working Time [Min] | 3 min | Working Time [Nom] | 3-6 min | Wt. | 0.17 lb |
| Be Pressure SP-900SD Submersible Pump, 1 HP Side Discharge Features: - 1.5 side discharge w/ float
- 1 hp, 115V, 1100W
- Tethered float switch
- 4360 gal /hr capacity
- 31 ft max delivery height
- 23 ft max submersible depth
- 0.2 maximum solid handling
- Copper windings
- Mechanical seal
- 25 ft cord
- Stainless steel/plastic body
Product Specifications - BRAND: BE Pressure
- MANUFACTURERS PART NUMBER: SP-900SD
- TYPE: Submersible Sump Pump
- WIDTH INCHES: 6
- HEIGHT INCHES: 7-3/4
- MAXIMUM DIAMETER SOLIDS INCHES: 3/16
- CONSTRUCTION: Stainless Steel
- IMPELLER MATERIAL: Fiberglass Reinforced Polymer
- VOLTAGE: 115
- HORSEPOWER: 1
- GALLONS PER MINUTE: 73.5
- SUCTION/DRAW HEAD FEET: 31
- CORD LENGTH FEET: 25
- DISCHARGE CONNECTION TYPE: NPT
- SWITCH TYPE: Float
- DISCHARGE CONNECTION SIZE INCHES: 1-1/2
| TP 4013HM Features The TP 4013HM is powered by reliable Honda engines with automatic low oil shut down guards. Heavy-duty self-priming pumps. Corrosive resistant seals. Durable cast iron impeller 4" TRASH Pump:- 389cc Honda GX390 Engine
- Recoil start & Low oil alert
- Fuel tank capacity 1.8 Gal. (6.1L)
- 4" Intake connection MNPT
- 4" OUTLET CONNECTION MNPT
- 580 GPM max flow
- Up to 1" solids
- 95' TOTAL Lift
- 26' SUCTION Lift
Product Specifications- BRAND: BE Pressure
- MANUFACTURERS PART NUMBERTP-4013HM
- TYPE: Trash Pump
- DISCHARGE HEAD FEET: 95
- INLET CONNECTION INCHES: 4
- MAXIMUM DIAMETER SOLIDS INCHES: 1
- HORSEPOWER: 13
- FUEL TANK CAPACITY GALLONS: 1.8
- GALLONS PER MINUTE: 580
- SUCTION/DRAW HEAD FEET: 26
- DISCHARGE CONNECTION TYPEM: NPT
- ENGINE: Honda GX390 389CC
- INLET CONNECTION TYPE: MNPT
- STYLE: Trash
- DISCHARGE CONNECTION SIZE INCHES: 4
|
Reviews
There are no reviews yet.