Flotec Thermoplastic Convertible Jet Pump 1 HP

$410.95
NewTBS

SKU: T9AB2224932 Categories: ,

Flotec Thermoplastic Convertible Jet Pump 1 HP

Corrosion resistant convertible jet pumps are constructed of rugged fiberglass-reinforced thermoplastic, and assure years of dependable service.

Key Features:

  • Superior performance at depths to water of 100′ or less
  • Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
  • Ready-to-install 230 volt motor – see manual for 115 volt conversion

Product Specifications

BRAND: Flotec

MANUFACTURERS PART NUMBER: FP4332-08

LENGTH INCHE: 21.063

WIDTH INCHES: 12.313

HEIGHT INCHES: 12.375

WEIGHT LBS: 21.063

COLOR FINISH: Black

CONSTRUCTION: Thermoplastic

SHAFT SEAL CONSTRUCTION: Silicone Carbide

AMPS: 15/20

HERTZ: 60

PHASE: 1

VOLTAGE: 230/115

HORSEPOWER: 1

GALLONS PER MINUTE: 20.7

SUCTION/DRAW HEAD FEET: 25/90

CORD LENGTH FEET: 8

DISCHARGE CONNECTION TYPE: NPT

SWITCH TYPE–30/50 Preset Pressure

INCLUDES: Threaded Ports For Pressure Gauge

DISCHARGE CONNECTION SIZE INCHES: 1

WARRANTY: 1 Year Limited

Reviews

There are no reviews yet.

Be the first to review “Flotec Thermoplastic Convertible Jet Pump 1 HP”

Your email address will not be published. Required fields are marked *

Vendor Information

  • Address:
  • No ratings found yet!

Quick Comparison

SettingsFlotec Thermoplastic Convertible Jet Pump 1 HP removeMulti-Purpose Duct Tapes, Silver, 2 in x 60 yd x 8.5 mil removeTP 4013HM Trash Pump 4” Intake/Outlet 13HP Honda Engine removeWater Transfer Pump 3" Intake/Outlet 6.5HP Honda Engine remove567 High Temperature PST Thread Sealant, 50 mL Tube, Off-White removeApache 98138015 1-1/2" x 50' PVC Lay Flat Discharge Hose w/ M x F Aluminum Short Shanks remove
ImageFlotec Thermoplastic Convertible Jet PumpMulti-Purpose Duct Tapestrash-pump-4-intakeoutletWater Transfer Pump 3" Intake/Outlet 6.5HP Honda EnginePVC Lay Flat Discharge Hose
SKUT9AB2224932573-1086769T9A300848T9A300846442-2087067T9AB484030
Rating
Price$410.95$6.95$1,999.00$546.00$26.58$31.95
Stock
Availability
Add to cart

Description
ContentFlotec Thermoplastic Convertible Jet Pump 1 HP Corrosion resistant convertible jet pumps are constructed of rugged fiberglass-reinforced thermoplastic, and assure years of dependable service. Key Features:
  • Superior performance at depths to water of 100' or less
  • Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
  • Ready-to-install 230 volt motor - see manual for 115 volt conversion
Product Specifications BRAND: Flotec MANUFACTURERS PART NUMBER: FP4332-08 LENGTH INCHE: 21.063 WIDTH INCHES: 12.313 HEIGHT INCHES: 12.375 WEIGHT LBS: 21.063 COLOR FINISH: Black CONSTRUCTION: Thermoplastic SHAFT SEAL CONSTRUCTION: Silicone Carbide AMPS: 15/20 HERTZ: 60 PHASE: 1 VOLTAGE: 230/115 HORSEPOWER: 1 GALLONS PER MINUTE: 20.7 SUCTION/DRAW HEAD FEET: 25/90 CORD LENGTH FEET: 8 DISCHARGE CONNECTION TYPE: NPT SWITCH TYPE--30/50 Preset Pressure INCLUDES: Threaded Ports For Pressure Gauge DISCHARGE CONNECTION SIZE INCHES: 1 WARRANTY: 1 Year Limited
Nashua® Multi-Purpose Duct Tapes Product Details: Adheres to a wide variety of surfaces Conforms well to irregular surfaces Tears straight, hangs straight, curl resistant Easy unwind
Specifications
Adhesion to Steel40 oz/in
BrandNASHUA
ColorSilver
Country of OriginUS
HazmatNO
Length [Nom]60 yd
MPI CatalogYES
MPI Catalog Page#2021:73
ORMDNO
Packing TypeRoll
Prop 65NO
Series394
Special OrderNO
Temp. Range [Max]200 °F
Tensile Strength [Nom]19 lb/in
Thickness [Nom]8.5 mil
TypeVersatile Performance
Width [Nom]2 in
Wt.1.59 lb

TP 4013HM Features

The TP 4013HM is powered by reliable Honda engines with automatic low oil shut down guards. Heavy-duty self-priming pumps. Corrosive resistant seals. Durable cast iron impeller 4" TRASH Pump:
  • 389cc Honda GX390 Engine
  • Recoil start & Low oil alert
  • Fuel tank capacity 1.8 Gal. (6.1L)
  • 4" Intake connection MNPT
  • 4" OUTLET CONNECTION MNPT
  • 580 GPM max flow
  • Up to 1" solids
  • 95' TOTAL Lift
  • 26' SUCTION Lift
Product Specifications
  • BRAND: BE Pressure
  • MANUFACTURERS PART NUMBERTP-4013HM
  • TYPE: Trash Pump
  • DISCHARGE HEAD FEET: 95
  • INLET CONNECTION INCHES: 4
  • MAXIMUM DIAMETER SOLIDS INCHES: 1
  • HORSEPOWER: 13
  • FUEL TANK CAPACITY GALLONS: 1.8
  • GALLONS PER MINUTE: 580
  • SUCTION/DRAW HEAD FEET: 26
  • DISCHARGE CONNECTION TYPEM: NPT
  • ENGINE: Honda GX390 389CC
  • INLET CONNECTION TYPE: MNPT
  • STYLE: Trash
  • DISCHARGE CONNECTION SIZE INCHES: 4
Industrial Water Transfer Pump BE Pressure 3" Commercial water transfer pump was built to move large volumes of water while smooth running and long lasting. Used for draining a pool, Irrigating lawn, filling or emptying resevoirs, emptying a flooded basement and much more in no time. Our pump has a 3-Inch MNPT intake & 3-inch outlet connection. It is run by a strong Honda GX200 engine and has a max flow of 264 GPM. Discharge Hose Kits Sold Seperately.
  • GX200 Honda Engine (6.5)
  • Recoil Start
  • Fuel Tank Capacity, 0.82. GAL. (3.1L)
  • 3" Intake Connection MNPT
  • 3" Outlet Connection MNPT
  • 264 GPM
  • Centrifugal Aluminum Pump
  • Heavy Duty Cast Iron Impeller
  • 1 Year Pump Warranty
  • 3 Year Engine Warranty
Product Specifications
  • BRAND:BE Pressure
  • MANUFACTURERS PART NUMBER:WP-3065HL
  • TYPE: Water Pump
  • DISCHARGE HEAD FEET: 106
  • INLET CONNECTION INCHES: 3
  • MAXIMUM DIAMETER SOLIDS INCHES: No Solids
  • IMPELLER MATERIAL: Heavy Duty Cast Iron
  • HORSEPOWER: 6-1/2
  • FUEL TANK CAPACITY GALLONS: 0.82
  • GALLONS PER MINUTE: 265
  • SUCTION/DRAW HEAD FEET: 26
  • DISCHARGE CONNECTION TYPE: MNPT
  • ENGINE: Honda GX200 160CC
  • FUEL TYPE: Gasoline
  • INLET CONNECTION TYPEMNPT
  • STYLE: Water
  • DISCHARGE CONNECTION SIZE INCHES: 3
  • MODEL: 300846
Loctite® 567TM High Temperature PST® Thread Sealants Product Details: Instant thread sealant for taper/taper threads and fittings Great choice for high temperature and high pressure applications Controlled strength for easy disassembly with hand tools Prevents leaks; does not shrink, crack, creep or shred Provides excellent solvent resistance Eliminates galling on stainless steel Testing and Approvals: ABS; NSF/ANSI 61; UL Classified for U.S.; ULC Classified for Canada; CFIA Listed
Specifications
Anchor Brand CatalogNO
ApplicationsFor Metal Parts
Big CatalogNO
BrandLOCTITE
Capacity Vol. [Nom]50 mL
ColorOff White
Construction CatalogNO
Country of OriginUS
Full Cure Time @ Temp.24 Hours @ 72°F
HazmatNO
Jan/San CatalogNO
ORMDNO
Packing TypeTube
Pressure [Nom]10,000 psi
Prop 65NO
Quarterly FlierNO
ResistanceSolvent
Special OrderNO
Specific Gravity [Nom]1.15
Temp. Range [Max]480°F
Temp. Range [Min]-65°F
VOC0.13%; 1.38 g/L
Viscosity [Max]800,000 cP
Viscosity [Min]280,000 cP
Welding CatalogNO
Apache 98138015 1-1/2" x 50' PVC Lay Flat Discharge Hose w/ M x F Aluminum Short Shanks Features:
  • PVC tube/cover reinforced with 3 ply polyester yarns (one longitudinal and two spiral plies), extruded simultaneously to obtain maximum bonding
  • Resistant to oils, grease, many chemicals and acids
  • Strong, lightweight non water-absorbing and mildew-proof hose that rolls up flat for easy storage
  • Coupled with Male x Female aluminum short shanks with Band-It®clamps
Product Specifications LENGTH FEET: 50 COLOR FINISH:  Blue BRAND: Apache Hose & Belting CONNECTION TYPE: Alum C x E Cam & Groove CONSTRUCTION: PVC DESCRIPTION: Hose W/Connections DIAMETER INCHES: 1-1/2 MANUFACTURERS PART NUMBER: 98138015 PSI: 75 WEIGHT: 24.5 STOCK TYPE: Stock
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information