| Content | TP 4013HM Features The TP 4013HM is powered by reliable Honda engines with automatic low oil shut down guards. Heavy-duty self-priming pumps. Corrosive resistant seals. Durable cast iron impeller 4" TRASH Pump:- 389cc Honda GX390 Engine
- Recoil start & Low oil alert
- Fuel tank capacity 1.8 Gal. (6.1L)
- 4" Intake connection MNPT
- 4" OUTLET CONNECTION MNPT
- 580 GPM max flow
- Up to 1" solids
- 95' TOTAL Lift
- 26' SUCTION Lift
Product Specifications- BRAND: BE Pressure
- MANUFACTURERS PART NUMBERTP-4013HM
- TYPE: Trash Pump
- DISCHARGE HEAD FEET: 95
- INLET CONNECTION INCHES: 4
- MAXIMUM DIAMETER SOLIDS INCHES: 1
- HORSEPOWER: 13
- FUEL TANK CAPACITY GALLONS: 1.8
- GALLONS PER MINUTE: 580
- SUCTION/DRAW HEAD FEET: 26
- DISCHARGE CONNECTION TYPEM: NPT
- ENGINE: Honda GX390 389CC
- INLET CONNECTION TYPE: MNPT
- STYLE: Trash
- DISCHARGE CONNECTION SIZE INCHES: 4
| Be Pressure ST-900SD Submersible Pump, 1-1/4 HP Side Discharge Features:- 1.5 side discharge trash submersiblew/ float
- 1 ¼ hp, 115V, 1100W
- Tethered float switch
- 4095 gal /hr capacity
- 36 ft max delivery height
- 16.5 ft max submersible depth
- 1.4 maximum solid handling
- Copper windings
- Mechanical seal
- 25 ft cord
- Stainless steel body
Product Specifications- BRAND: BE Pressure
- MANUFACTURERS PART NUMBER: ST-900SD
- TYPE: Submersible Sump Pump
- WIDTH INCHES: 6 2/3
- HEIGHT INCHES: 7-7/8
- MAXIMUM DIAMETER SOLIDS INCHES: 1-1/4
- CONSTRUCTION: Stainless Steel
- IMPELLER MATERIAL: Fiberglass Reinforced Polymer
- VOLTAGE: 115
- HORSEPOWER: 1-1/4
- GALLONS PER MINUTE: 68.25
- SUCTION/DRAW HEAD FEET: 36
- CORD LENGTH FEET: 25
- DISCHARGE CONNECTION TYPE: NPT
- SWITCH TYPE: Float
- DISCHARGE CONNECTION SIZE INCHES: 1-1/2
| Cardboard Corrugated Boxes 6" x 6" x 6" 200#/ECT-32 - 25 Pack Cube boxes disburse product weight evenly for easier stacking.- Use this popular size cube box to package cylindrical, round or odd shaped products
- Manufactured from 200#/ECT-32 kraft corrugated
- Sold and shipped flat in bundle quantities of 25
Product Specifications- BRAND: Approved Vendor
- INSIDE LENGTH INCHES: 6
- INSIDE WIDTH INCHES:6
- INSIDE HEIGHT INCHES:6
- COLOR FINISH: Kraft
- MATERIAL: C Flute
- PACKAGE QUANTITY: 25
- BOX STYLE: Regular Slotted
- WALL TYPE: Single
- TYPE: Corrugated Boxes – Best Value
- STRENGTH: 200# / ECT-32
- WEIGHT CAPACITY: 65 lbs
| Be Pressure SP-900SD Submersible Pump, 1 HP Side Discharge Features: - 1.5 side discharge w/ float
- 1 hp, 115V, 1100W
- Tethered float switch
- 4360 gal /hr capacity
- 31 ft max delivery height
- 23 ft max submersible depth
- 0.2 maximum solid handling
- Copper windings
- Mechanical seal
- 25 ft cord
- Stainless steel/plastic body
Product Specifications - BRAND: BE Pressure
- MANUFACTURERS PART NUMBER: SP-900SD
- TYPE: Submersible Sump Pump
- WIDTH INCHES: 6
- HEIGHT INCHES: 7-3/4
- MAXIMUM DIAMETER SOLIDS INCHES: 3/16
- CONSTRUCTION: Stainless Steel
- IMPELLER MATERIAL: Fiberglass Reinforced Polymer
- VOLTAGE: 115
- HORSEPOWER: 1
- GALLONS PER MINUTE: 73.5
- SUCTION/DRAW HEAD FEET: 31
- CORD LENGTH FEET: 25
- DISCHARGE CONNECTION TYPE: NPT
- SWITCH TYPE: Float
- DISCHARGE CONNECTION SIZE INCHES: 1-1/2
| Flotec Thermoplastic Convertible Jet Pump 1 HP Corrosion resistant convertible jet pumps are constructed of rugged fiberglass-reinforced thermoplastic, and assure years of dependable service. Key Features:- Superior performance at depths to water of 100' or less
- Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
- Ready-to-install 230 volt motor - see manual for 115 volt conversion
Product Specifications BRAND: Flotec MANUFACTURERS PART NUMBER: FP4332-08 LENGTH INCHE: 21.063 WIDTH INCHES: 12.313 HEIGHT INCHES: 12.375 WEIGHT LBS: 21.063 COLOR FINISH: Black CONSTRUCTION: Thermoplastic SHAFT SEAL CONSTRUCTION: Silicone Carbide AMPS: 15/20 HERTZ: 60 PHASE: 1 VOLTAGE: 230/115 HORSEPOWER: 1 GALLONS PER MINUTE: 20.7 SUCTION/DRAW HEAD FEET: 25/90 CORD LENGTH FEET: 8 DISCHARGE CONNECTION TYPE: NPT SWITCH TYPE--30/50 Preset Pressure INCLUDES: Threaded Ports For Pressure Gauge DISCHARGE CONNECTION SIZE INCHES: 1 WARRANTY: 1 Year Limited | Flotec Thermoplastic Sprinkler Pump 1 HP Corrosion-resistant, self priming sprinkler pumps are constructed of rugged, heavy-duty fiberglass-reinforced thermoplastic and capable of operating up to 30 sprinkler heads. Key Features:- Superior performance at depths to water of 20' or less
- Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
- Ready-to-install 230 volt motor (dual voltage)
- Self-priming after pump housing is initially filled (Check Valve or Foot Valve required)
Product Specifications- BRAND:Flotec
- MANUFACTURERS PART NUMBER: FP5162-08
- LENGTH INCHE:22
- WIDTH INCHES: 12.313
- HEIGHT INCHES: 13.125
- WEIGHT LBS: 30.6
- COLOR FINISH: Black
- CONSTRUCTION: Thermoplastic
- SHAFT SEAL CONSTRUCTION: Silicone Carbide
- AMPS: 15/20
- HERTZ: 60
- PHASE: 1
- VOLTAGE: 230/115
- HORSEPOWER: 1
- GALLONS PER MINUTE: 55
- SUCTION/DRAW HEAD FEET: 25
- CORD LENGTH FEET: 10
- DISCHARGE CONNECTION TYPE: NPT
- SWITCH TYPE--
- INCLUDES: Threaded Ports For Pressure Gauge
- DISCHARGE CONNECTION SIZE INCHES: 1-1/2
- WARRANTY: 1 Year Limited
|
Reviews
There are no reviews yet.