| Content | INDUSTRIAL PNEUMATIC CARTON STAPLER Seal cartons effortlessly with this pneumatic carton stapler. It is ideal for high volumes and has 5 depth settings plus a clinch adjustment. Use with air compressor @ 80 psi. Uses 1 1/4" x 5/8" staples. Product Specifications- BRAND: American International Electric
- WIDTH INCHES: 1-1/4
- DEPTH INCHES: .63
- COLOR FINISH: Blue
- ASSEMBLY: Assembled
- CONSTRUCTION: Steel
- DESCRIPTION: Pneumatic Carton Stapler
- MODE: L488046
- FOR USE WITH: 1-1/4" x 5/8" Staples
- TYPE: Stapler - Pneumatic
| Be Pressure SP-900SD Submersible Pump, 1 HP Side Discharge Features: - 1.5 side discharge w/ float
- 1 hp, 115V, 1100W
- Tethered float switch
- 4360 gal /hr capacity
- 31 ft max delivery height
- 23 ft max submersible depth
- 0.2 maximum solid handling
- Copper windings
- Mechanical seal
- 25 ft cord
- Stainless steel/plastic body
Product Specifications - BRAND: BE Pressure
- MANUFACTURERS PART NUMBER: SP-900SD
- TYPE: Submersible Sump Pump
- WIDTH INCHES: 6
- HEIGHT INCHES: 7-3/4
- MAXIMUM DIAMETER SOLIDS INCHES: 3/16
- CONSTRUCTION: Stainless Steel
- IMPELLER MATERIAL: Fiberglass Reinforced Polymer
- VOLTAGE: 115
- HORSEPOWER: 1
- GALLONS PER MINUTE: 73.5
- SUCTION/DRAW HEAD FEET: 31
- CORD LENGTH FEET: 25
- DISCHARGE CONNECTION TYPE: NPT
- SWITCH TYPE: Float
- DISCHARGE CONNECTION SIZE INCHES: 1-1/2
| Devcon 5 Minute® Epoxies Product Details: Rapid-curing, general-purpose adhesive/encapsulant
Bonds rigid, durable substrates, including glass, metal, ceramics, concrete and wood.
Forms a clear, hard bond self-leveling liquid in minutes
100% reactive, no solvents
Easily dispenses and mixes in seconds
Dries in 15 minutes, reaches functional strength in 1 hour
Good solvent resistance Testing and Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure; Cured hardness tested according to ASTM D-2240; Cured density tested according to ASTM D1002; Compression strength tested according to ASTM D695; Dielectric strength tested according to ASTM D149| Specifications | | Adhesive Tensile Shear | 1,400 psi | | Applicable Materials | Most Metals; Fabric; Ceramic; Glass; Concrete; Woo | | Applications | Multi-Purpose | | Big Catalog Page# | 2012:167 | | Brand | DEVCON | | Capacity Vol. [Nom] | 25 mL | | Chemical Compound | Epoxy | | Color | Light Amber | | Country of Origin | US | | Dielectric Strength | 490 V/mil | | Fix Cure Time @ Temp. | 1 h @ 75 °F | | Full Cure Time @ Temp. | 16 min @ 75 °F | | Gap Fill [Nom] | 1/4 in | | Hardness [Nom] | 85 Shore D | | Hazmat | NO | | MPI Catalog | YES | | MPI Catalog Page# | 2021:56 | | ORMD | NO | | Packing Type | Dev-Tube™ | | Prop 65 | NO | | Resistance | Kerosene; Sulfuric Acid-10%; Toluene; Hydrochloric | | Special Order | NO | | Temp. Range [Max] | 200 °F | | Temp. Range [Min] | -40 °F | | UNSPSC | 31201600 | | Viscosity [Nom] | 10,000 cP | | Working Time [Max] | 6 min | | Working Time [Min] | 3 min | | Working Time [Nom] | 3-6 min | | Wt. | 0.17 lb |
| Rectorseal Tru-BluTM Pipe Thread Sealants Product Details: For refrigeration and industrial applications
Recommended for use on galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC and CPVC pipe
Ideal for use as positive lock and seal on threaded fasteners Testing and Approvals: Conforms to TT-S-1732| Specifications | | Application Temp. Range [Max] | 140 °F | | Application Temp. Range [Min] | 20 °F | | Applications | Threaded Galvanized Steel; Iron; Brass; Copper; Al | | Big Catalog Page# | 2012:213 | | Brand | RECTORSEAL | | Capacity Vol. [Nom] | 1 pt | | Color | Blue | | Country of Origin | US | | Flash Point [Nom] | 144 °F | | Full Cure Time @ Temp. | 24 h @ 77 °F | | Hazmat | NO | | MPI Catalog | YES | | MPI Catalog Page# | 2021:69 | | ORMD | NO | | Packing Type | Can | | Prop 65 | NO | | Resistance | Moisture; Dirt; Dust | | Special Order | NO | | Specific Gravity [Nom] | 1.38 | | Temp. Range [Max] | 350.0 °F | | Temp. Range [Min] | -50.0 °F | | UNSPSC | 31201600 | | VOC | 23%; 230 g/L | | Wt. | 1.58 lb |
| Flotec Thermoplastic Convertible Jet Pump 1 HP Corrosion resistant convertible jet pumps are constructed of rugged fiberglass-reinforced thermoplastic, and assure years of dependable service. Key Features:- Superior performance at depths to water of 100' or less
- Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
- Ready-to-install 230 volt motor - see manual for 115 volt conversion
Product Specifications BRAND: Flotec MANUFACTURERS PART NUMBER: FP4332-08 LENGTH INCHE: 21.063 WIDTH INCHES: 12.313 HEIGHT INCHES: 12.375 WEIGHT LBS: 21.063 COLOR FINISH: Black CONSTRUCTION: Thermoplastic SHAFT SEAL CONSTRUCTION: Silicone Carbide AMPS: 15/20 HERTZ: 60 PHASE: 1 VOLTAGE: 230/115 HORSEPOWER: 1 GALLONS PER MINUTE: 20.7 SUCTION/DRAW HEAD FEET: 25/90 CORD LENGTH FEET: 8 DISCHARGE CONNECTION TYPE: NPT SWITCH TYPE--30/50 Preset Pressure INCLUDES: Threaded Ports For Pressure Gauge DISCHARGE CONNECTION SIZE INCHES: 1 WARRANTY: 1 Year Limited | Loctite® 567TM High Temperature PST® Thread Sealants Product Details: Instant thread sealant for taper/taper threads and fittings
Great choice for high temperature and high pressure applications
Controlled strength for easy disassembly with hand tools
Prevents leaks; does not shrink, crack, creep or shred
Provides excellent solvent resistance
Eliminates galling on stainless steel Testing and Approvals: ABS; NSF/ANSI 61; UL Classified for U.S.; ULC Classified for Canada; CFIA Listed| Specifications | | Anchor Brand Catalog | NO | | Applications | For Metal Parts | | Big Catalog | NO | | Brand | LOCTITE | | Capacity Vol. [Nom] | 50 mL | | Color | Off White | | Construction Catalog | NO | | Country of Origin | US | | Full Cure Time @ Temp. | 24 Hours @ 72°F | | Hazmat | NO | | Jan/San Catalog | NO | | ORMD | NO | | Packing Type | Tube | | Pressure [Nom] | 10,000 psi | | Prop 65 | NO | | Quarterly Flier | NO | | Resistance | Solvent | | Special Order | NO | | Specific Gravity [Nom] | 1.15 | | Temp. Range [Max] | 480°F | | Temp. Range [Min] | -65°F | | VOC | 0.13%; 1.38 g/L | | Viscosity [Max] | 800,000 cP | | Viscosity [Min] | 280,000 cP | | Welding Catalog | NO |
|
Reviews
There are no reviews yet.