| Content | Be Pressure SP-750TD Submersible Pump, 3/4 HP Top Discharge Features:- 1.5 top discharge w/ float
- 3/4 hp, 115V, 750W
- Tethered float switch
- 2905 gal /hr capacity
- 28 ft max delivery height
- 26 ft max submersible depth
- 0.2 maximum solid handling
- Copper windings
- Mechanical seal
- 25 ft cord
- Stainless steel body
Product Specifications- BRAND:BE Pressure
- MANUFACTURERS PART NUMBER: SP-750TD
- TYPE: Submersible Sump Pump
- WIDTH INCHES:6
- HEIGHT INCHES:9-7/16
- MAXIMUM DIAMETER SOLIDS INCHES: 3/16
- CONSTRUCTION: Stainless Steel
- IMPELLER MATERIAL: Fiberglass Reinforced Polymer
- VOLTAGE: 115
- HORSEPOWER: 3/4
- GALLONS PER MINUTE: 48
- SUCTION/DRAW HEAD FEET: 28
- CORD LENGTH FEET: 25
- DISCHARGE CONNECTION TYPE: NPT
- SWITCH TYPE: Float
- DISCHARGE CONNECTION SIZE INCHES: 1-1/2
| TP 4013HM Features The TP 4013HM is powered by reliable Honda engines with automatic low oil shut down guards. Heavy-duty self-priming pumps. Corrosive resistant seals. Durable cast iron impeller 4" TRASH Pump:- 389cc Honda GX390 Engine
- Recoil start & Low oil alert
- Fuel tank capacity 1.8 Gal. (6.1L)
- 4" Intake connection MNPT
- 4" OUTLET CONNECTION MNPT
- 580 GPM max flow
- Up to 1" solids
- 95' TOTAL Lift
- 26' SUCTION Lift
Product Specifications- BRAND: BE Pressure
- MANUFACTURERS PART NUMBERTP-4013HM
- TYPE: Trash Pump
- DISCHARGE HEAD FEET: 95
- INLET CONNECTION INCHES: 4
- MAXIMUM DIAMETER SOLIDS INCHES: 1
- HORSEPOWER: 13
- FUEL TANK CAPACITY GALLONS: 1.8
- GALLONS PER MINUTE: 580
- SUCTION/DRAW HEAD FEET: 26
- DISCHARGE CONNECTION TYPEM: NPT
- ENGINE: Honda GX390 389CC
- INLET CONNECTION TYPE: MNPT
- STYLE: Trash
- DISCHARGE CONNECTION SIZE INCHES: 4
| Devcon 5 Minute® Epoxies Product Details: Rapid-curing, general-purpose adhesive/encapsulant
Bonds rigid, durable substrates, including glass, metal, ceramics, concrete and wood.
Forms a clear, hard bond self-leveling liquid in minutes
100% reactive, no solvents
Easily dispenses and mixes in seconds
Dries in 15 minutes, reaches functional strength in 1 hour
Good solvent resistance Testing and Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure; Cured hardness tested according to ASTM D-2240; Cured density tested according to ASTM D1002; Compression strength tested according to ASTM D695; Dielectric strength tested according to ASTM D149| Specifications | | Adhesive Tensile Shear | 1,400 psi | | Applicable Materials | Most Metals; Fabric; Ceramic; Glass; Concrete; Woo | | Applications | Multi-Purpose | | Big Catalog Page# | 2012:167 | | Brand | DEVCON | | Capacity Vol. [Nom] | 25 mL | | Chemical Compound | Epoxy | | Color | Light Amber | | Country of Origin | US | | Dielectric Strength | 490 V/mil | | Fix Cure Time @ Temp. | 1 h @ 75 °F | | Full Cure Time @ Temp. | 16 min @ 75 °F | | Gap Fill [Nom] | 1/4 in | | Hardness [Nom] | 85 Shore D | | Hazmat | NO | | MPI Catalog | YES | | MPI Catalog Page# | 2021:56 | | ORMD | NO | | Packing Type | Dev-Tube™ | | Prop 65 | NO | | Resistance | Kerosene; Sulfuric Acid-10%; Toluene; Hydrochloric | | Special Order | NO | | Temp. Range [Max] | 200 °F | | Temp. Range [Min] | -40 °F | | UNSPSC | 31201600 | | Viscosity [Nom] | 10,000 cP | | Working Time [Max] | 6 min | | Working Time [Min] | 3 min | | Working Time [Nom] | 3-6 min | | Wt. | 0.17 lb |
| Flotec Thermoplastic Convertible Jet Pump 1 HP Corrosion resistant convertible jet pumps are constructed of rugged fiberglass-reinforced thermoplastic, and assure years of dependable service. Key Features:- Superior performance at depths to water of 100' or less
- Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
- Ready-to-install 230 volt motor - see manual for 115 volt conversion
Product Specifications BRAND: Flotec MANUFACTURERS PART NUMBER: FP4332-08 LENGTH INCHE: 21.063 WIDTH INCHES: 12.313 HEIGHT INCHES: 12.375 WEIGHT LBS: 21.063 COLOR FINISH: Black CONSTRUCTION: Thermoplastic SHAFT SEAL CONSTRUCTION: Silicone Carbide AMPS: 15/20 HERTZ: 60 PHASE: 1 VOLTAGE: 230/115 HORSEPOWER: 1 GALLONS PER MINUTE: 20.7 SUCTION/DRAW HEAD FEET: 25/90 CORD LENGTH FEET: 8 DISCHARGE CONNECTION TYPE: NPT SWITCH TYPE--30/50 Preset Pressure INCLUDES: Threaded Ports For Pressure Gauge DISCHARGE CONNECTION SIZE INCHES: 1 WARRANTY: 1 Year Limited | Loctite® 242® Threadlockers, Medium Strength Product Details: A general purpose, removable threadlocker for fasteners between 1/4" and 3/4" diameters
Controlled lubricity for accurate clamp loads
Parts can be separated using hand tools Testing and Approvals: MIL-S-46163A for Existing Designs; NSF/ANSI 61; NSF P1; ABS; CFIA| Specifications | | Applicable Materials | Stainless Steel; Most Metals | | Applications | Thread | | Big Catalog Page# | 2012:217 | | Brand | LOCTITE | | Capacity Vol. [Nom] | 50 mL | | Chemical Compound | Acrylic | | Color | Blue | | Country of Origin | US | | Curing Method | Anaerobic | | Fix Cure Time @ Temp. | 10.00 min @ 77 °F | | Full Cure Time @ Temp. | 24 h @ 77 °F | | Hazmat | NO | | MPI Catalog | NO | | ORMD | NO | | Odor/Scent | Mild | | Packing Type | Bottle | | Physical Form | Liquid | | Prop 65 | NO | | Resistance | 1,1,1, Trichloroethane; Brake Fluid; Acetone; Etha | | Special Order | NO | | Temp. Range [Max] | 300 °F | | Temp. Range [Min] | -65 °F | | Torque (Break) | 110 in lb | | Torque (Prevail) | 43 in lb | | UNSPSC | 31201600 | | Viscosity [Max] | 5,000 cP | | Viscosity [Min] | 1,200 cP | | Wt. | 0.22 lb |
| Cardboard Corrugated Boxes 12" x 6" x 6" 200#/ECT-32 - 25 Pack- Wide openings along the length make these cartons easy to pack
- Great for long and narrow items
- Boxes are manufactured from 200#/ECT-32 kraft corrugated
Product Specifications- BRAND: Approved Vendor
- INSIDE LENGTH INCHES: 12
- INSIDE WIDTH INCHES:6
- INSIDE HEIGHT INCHES:6
- COLOR FINISH: Kraft
- MATERIAL: C Flute
- PACKAGE QUANTITY: 25
- BOX STYLE: Regular Slotted
- WALL TYPE: Single
- TYPE: Corrugated Boxes - Best Value
- STRENGTH: 200# / ECT-32
- WEIGHT CAPACITY: 65 lbs
|
Reviews
There are no reviews yet.