| Content | TP 4013HM Features The TP 4013HM is powered by reliable Honda engines with automatic low oil shut down guards. Heavy-duty self-priming pumps. Corrosive resistant seals. Durable cast iron impeller 4" TRASH Pump:- 389cc Honda GX390 Engine
- Recoil start & Low oil alert
- Fuel tank capacity 1.8 Gal. (6.1L)
- 4" Intake connection MNPT
- 4" OUTLET CONNECTION MNPT
- 580 GPM max flow
- Up to 1" solids
- 95' TOTAL Lift
- 26' SUCTION Lift
Product Specifications- BRAND: BE Pressure
- MANUFACTURERS PART NUMBERTP-4013HM
- TYPE: Trash Pump
- DISCHARGE HEAD FEET: 95
- INLET CONNECTION INCHES: 4
- MAXIMUM DIAMETER SOLIDS INCHES: 1
- HORSEPOWER: 13
- FUEL TANK CAPACITY GALLONS: 1.8
- GALLONS PER MINUTE: 580
- SUCTION/DRAW HEAD FEET: 26
- DISCHARGE CONNECTION TYPEM: NPT
- ENGINE: Honda GX390 389CC
- INLET CONNECTION TYPE: MNPT
- STYLE: Trash
- DISCHARGE CONNECTION SIZE INCHES: 4
| Flotec Thermoplastic Sprinkler Pump 1 HP Corrosion-resistant, self priming sprinkler pumps are constructed of rugged, heavy-duty fiberglass-reinforced thermoplastic and capable of operating up to 30 sprinkler heads. Key Features:- Superior performance at depths to water of 20' or less
- Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
- Ready-to-install 230 volt motor (dual voltage)
- Self-priming after pump housing is initially filled (Check Valve or Foot Valve required)
Product Specifications- BRAND:Flotec
- MANUFACTURERS PART NUMBER: FP5162-08
- LENGTH INCHE:22
- WIDTH INCHES: 12.313
- HEIGHT INCHES: 13.125
- WEIGHT LBS: 30.6
- COLOR FINISH: Black
- CONSTRUCTION: Thermoplastic
- SHAFT SEAL CONSTRUCTION: Silicone Carbide
- AMPS: 15/20
- HERTZ: 60
- PHASE: 1
- VOLTAGE: 230/115
- HORSEPOWER: 1
- GALLONS PER MINUTE: 55
- SUCTION/DRAW HEAD FEET: 25
- CORD LENGTH FEET: 10
- DISCHARGE CONNECTION TYPE: NPT
- SWITCH TYPE--
- INCLUDES: Threaded Ports For Pressure Gauge
- DISCHARGE CONNECTION SIZE INCHES: 1-1/2
- WARRANTY: 1 Year Limited
| Product Specifications BRAND: Flotec MANUFACTURERS PART NUMBER: FP5172-08 LENGTH INCHE: 21.813 WIDTH INCHES: 12.5 HEIGHT INCHES: 13.125 WEIGHT LBS: 34.1 COLOR FINISH: Black CONSTRUCTION: Thermoplastic SHAFT SEAL CONSTRUCTION: Silicone Carbide AMPS: 15/20 HERTZ: 60 PHASE: 1 VOLTAGE: 230/115 HORSEPOWER: 1-1/2 GALLONS PER MINUTE: 67 SUCTION/DRAW HEAD FEET: 25 CORD LENGTH FEET: 10 DISCHARGE CONNECTION TYPE: NPT SWITCH TYPE–-- INCLUDES: Threaded Ports For Pressure Gauge DISCHARGE CONNECTION SIZE INCHES: 1-1/2 WARRANTY: 1 Year Limited | Flotec Thermoplastic Convertible Jet Pump 1 HP Corrosion resistant convertible jet pumps are constructed of rugged fiberglass-reinforced thermoplastic, and assure years of dependable service. Key Features:- Superior performance at depths to water of 100' or less
- Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
- Ready-to-install 230 volt motor - see manual for 115 volt conversion
Product Specifications BRAND: Flotec MANUFACTURERS PART NUMBER: FP4332-08 LENGTH INCHE: 21.063 WIDTH INCHES: 12.313 HEIGHT INCHES: 12.375 WEIGHT LBS: 21.063 COLOR FINISH: Black CONSTRUCTION: Thermoplastic SHAFT SEAL CONSTRUCTION: Silicone Carbide AMPS: 15/20 HERTZ: 60 PHASE: 1 VOLTAGE: 230/115 HORSEPOWER: 1 GALLONS PER MINUTE: 20.7 SUCTION/DRAW HEAD FEET: 25/90 CORD LENGTH FEET: 8 DISCHARGE CONNECTION TYPE: NPT SWITCH TYPE--30/50 Preset Pressure INCLUDES: Threaded Ports For Pressure Gauge DISCHARGE CONNECTION SIZE INCHES: 1 WARRANTY: 1 Year Limited | Industrial Water Transfer Pump BE Pressure 3" Commercial water transfer pump was built to move large volumes of water while smooth running and long lasting. Used for draining a pool, Irrigating lawn, filling or emptying resevoirs, emptying a flooded basement and much more in no time. Our pump has a 3-Inch MNPT intake & 3-inch outlet connection. It is run by a strong Honda GX200 engine and has a max flow of 264 GPM. Discharge Hose Kits Sold Seperately.- GX200 Honda Engine (6.5)
- Recoil Start
- Fuel Tank Capacity, 0.82. GAL. (3.1L)
- 3" Intake Connection MNPT
- 3" Outlet Connection MNPT
- 264 GPM
- Centrifugal Aluminum Pump
- Heavy Duty Cast Iron Impeller
- 1 Year Pump Warranty
- 3 Year Engine Warranty
Product Specifications- BRAND:BE Pressure
- MANUFACTURERS PART NUMBER:WP-3065HL
- TYPE: Water Pump
- DISCHARGE HEAD FEET: 106
- INLET CONNECTION INCHES: 3
- MAXIMUM DIAMETER SOLIDS INCHES: No Solids
- IMPELLER MATERIAL: Heavy Duty Cast Iron
- HORSEPOWER: 6-1/2
- FUEL TANK CAPACITY GALLONS: 0.82
- GALLONS PER MINUTE: 265
- SUCTION/DRAW HEAD FEET: 26
- DISCHARGE CONNECTION TYPE: MNPT
- ENGINE: Honda GX200 160CC
- FUEL TYPE: Gasoline
- INLET CONNECTION TYPEMNPT
- STYLE: Water
- DISCHARGE CONNECTION SIZE INCHES: 3
- MODEL: 300846
| Loctite® 242® Threadlockers, Medium Strength Product Details: A general purpose, removable threadlocker for fasteners between 1/4" and 3/4" diameters
Controlled lubricity for accurate clamp loads
Parts can be separated using hand tools Testing and Approvals: MIL-S-46163A for Existing Designs; NSF/ANSI 61; NSF P1; ABS; CFIA| Specifications | | Applicable Materials | Stainless Steel; Most Metals | | Applications | Thread | | Big Catalog Page# | 2012:217 | | Brand | LOCTITE | | Capacity Vol. [Nom] | 50 mL | | Chemical Compound | Acrylic | | Color | Blue | | Country of Origin | US | | Curing Method | Anaerobic | | Fix Cure Time @ Temp. | 10.00 min @ 77 °F | | Full Cure Time @ Temp. | 24 h @ 77 °F | | Hazmat | NO | | MPI Catalog | NO | | ORMD | NO | | Odor/Scent | Mild | | Packing Type | Bottle | | Physical Form | Liquid | | Prop 65 | NO | | Resistance | 1,1,1, Trichloroethane; Brake Fluid; Acetone; Etha | | Special Order | NO | | Temp. Range [Max] | 300 °F | | Temp. Range [Min] | -65 °F | | Torque (Break) | 110 in lb | | Torque (Prevail) | 43 in lb | | UNSPSC | 31201600 | | Viscosity [Max] | 5,000 cP | | Viscosity [Min] | 1,200 cP | | Wt. | 0.22 lb |
|
Reviews
There are no reviews yet.