Content | Pac Strapping Crimper For Polypropylene Strapping Hardened steel jaw crimper for polypropylene strapping. Product Specifications- BRAND: Pac Strapping
- CONSTRUCTION: Steel
- COLOR FINISH: Gray
- MANUFACTURERS PART NUMBERES: 48
- MAXIMUM MATERIAL THICKNESS: 0.023
- FOR USE WITH: Polypropylene
- TOOL TYPE: Crimper
- DUTY: Economy
- TYPE: Sealer
- STRAP WIDTH INCHES: 1/2
| Industrial Water Transfer Pump BE Pressure 3" Commercial water transfer pump was built to move large volumes of water while smooth running and long lasting. Used for draining a pool, Irrigating lawn, filling or emptying resevoirs, emptying a flooded basement and much more in no time. Our pump has a 3-Inch MNPT intake & 3-inch outlet connection. It is run by a strong Honda GX200 engine and has a max flow of 264 GPM. Discharge Hose Kits Sold Seperately.- GX200 Honda Engine (6.5)
- Recoil Start
- Fuel Tank Capacity, 0.82. GAL. (3.1L)
- 3" Intake Connection MNPT
- 3" Outlet Connection MNPT
- 264 GPM
- Centrifugal Aluminum Pump
- Heavy Duty Cast Iron Impeller
- 1 Year Pump Warranty
- 3 Year Engine Warranty
Product Specifications- BRAND:BE Pressure
- MANUFACTURERS PART NUMBER:WP-3065HL
- TYPE: Water Pump
- DISCHARGE HEAD FEET: 106
- INLET CONNECTION INCHES: 3
- MAXIMUM DIAMETER SOLIDS INCHES: No Solids
- IMPELLER MATERIAL: Heavy Duty Cast Iron
- HORSEPOWER: 6-1/2
- FUEL TANK CAPACITY GALLONS: 0.82
- GALLONS PER MINUTE: 265
- SUCTION/DRAW HEAD FEET: 26
- DISCHARGE CONNECTION TYPE: MNPT
- ENGINE: Honda GX200 160CC
- FUEL TYPE: Gasoline
- INLET CONNECTION TYPEMNPT
- STYLE: Water
- DISCHARGE CONNECTION SIZE INCHES: 3
- MODEL: 300846
| Flotec Thermoplastic Convertible Jet Pump 1 HP Corrosion resistant convertible jet pumps are constructed of rugged fiberglass-reinforced thermoplastic, and assure years of dependable service. Key Features:- Superior performance at depths to water of 100' or less
- Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
- Ready-to-install 230 volt motor - see manual for 115 volt conversion
Product Specifications BRAND: Flotec MANUFACTURERS PART NUMBER: FP4332-08 LENGTH INCHE: 21.063 WIDTH INCHES: 12.313 HEIGHT INCHES: 12.375 WEIGHT LBS: 21.063 COLOR FINISH: Black CONSTRUCTION: Thermoplastic SHAFT SEAL CONSTRUCTION: Silicone Carbide AMPS: 15/20 HERTZ: 60 PHASE: 1 VOLTAGE: 230/115 HORSEPOWER: 1 GALLONS PER MINUTE: 20.7 SUCTION/DRAW HEAD FEET: 25/90 CORD LENGTH FEET: 8 DISCHARGE CONNECTION TYPE: NPT SWITCH TYPE--30/50 Preset Pressure INCLUDES: Threaded Ports For Pressure Gauge DISCHARGE CONNECTION SIZE INCHES: 1 WARRANTY: 1 Year Limited | Mirrors Boxes 30" x 3-1/2" x 40" 200#/ECT-32 - Four 30" x 40" Pieces per Set These boxes were designed to create a "custom fit" for mirrors and other glass products.- Four pieces are required to create a complete carton - Pricing is per piece
- Panels feature "Fragile", "Handle with Care" and "Do Not Lay Flat" messages
- Manufactured from 200#/ECT-32 kraft corrugated
- Shipped flat and sold in bundle quantities of 4
Product Specifications- BRAND: Approved Vendor
- INSIDE LENGTH INCHES: 30
- INSIDE WIDTH INCHES: 3-1/2
- INSIDE HEIGHT INCHES: 40
- COLOR FINISH: Kraft
- MANUFACTURERS PART NUMBER: 30404PCMC
- MATERIAL: C Flute
- PACKAGE QUANTITY: 4
- WEIGHT LBS: 1.000
- WALL TYPE: Single
- TYPE: Specialty Moving Boxes
- STRENGTH: 200# / ECT-32
- WEIGHT CAPACITY: 65 lbs
- FOR USE WITH: Mirrors
| 2-inch Honda Water Pump FeaturesWater Pump 2 Inch Intake/Outlet 6.5 HP Honda Engine This 2-inch Honda Water Pump has an automatic low oil shutdown guard. Heavy-duty, corrosive-resistant seals. Durable cast iron impeller.Product Specifications- BRAND: BE Pressure
- MANUFACTURERS PART NUMBER: WP-2065HL
- TYPE: Water Pump
- DISCHARGE HEAD FEET: 105
- INLET CONNECTION INCHES: 2
- MAXIMUM DIAMETER SOLIDS INCHES: No Solids
- IMPELLER MATERIAL: Heavy Duty Cast Iron
- HORSEPOWER: 6-1/2
- CAPACITY GALLONS: 0.82
- FUEL TANK CAPACITY GALLONS: 0.82
- GALLONS PER MINUTE: 150
- SUCTION/DRAW HEAD FEET: 26
- DISCHARGE CONNECTION TYPE: MNPT
- ENGINE: Honda GX200 196CC
- INLET CONNECTION TYPE: MNPT
- STYLE: Water
- DISCHARGE CONNECTION SIZE INCHES: 2
- MODEL:300843
| TP 4013HM Features The TP 4013HM is powered by reliable Honda engines with automatic low oil shut down guards. Heavy-duty self-priming pumps. Corrosive resistant seals. Durable cast iron impeller 4" TRASH Pump:- 389cc Honda GX390 Engine
- Recoil start & Low oil alert
- Fuel tank capacity 1.8 Gal. (6.1L)
- 4" Intake connection MNPT
- 4" OUTLET CONNECTION MNPT
- 580 GPM max flow
- Up to 1" solids
- 95' TOTAL Lift
- 26' SUCTION Lift
Product Specifications- BRAND: BE Pressure
- MANUFACTURERS PART NUMBERTP-4013HM
- TYPE: Trash Pump
- DISCHARGE HEAD FEET: 95
- INLET CONNECTION INCHES: 4
- MAXIMUM DIAMETER SOLIDS INCHES: 1
- HORSEPOWER: 13
- FUEL TANK CAPACITY GALLONS: 1.8
- GALLONS PER MINUTE: 580
- SUCTION/DRAW HEAD FEET: 26
- DISCHARGE CONNECTION TYPEM: NPT
- ENGINE: Honda GX390 389CC
- INLET CONNECTION TYPE: MNPT
- STYLE: Trash
- DISCHARGE CONNECTION SIZE INCHES: 4
|
Reviews
There are no reviews yet.