Content | Arrow Fastener Staple Gun Tackers Product Details: Jam-proof mechanism
Light household duty
Sturdy all steel constructionSpecifications | Applications | Alarm Systems; Tagging; Electronics; NM Cable up t | Big Catalog Page# | 2012:1477 | Body Material | All Steel | Brand | ARROW FASTENER | Country of Origin | US | Finish | Durable Chrome | Hazmat | NO | MPI Catalog | NO | ORMD | NO | Prop 65 | NO | Special Order | YES | Staple Height [Nom] | 9/16 in; 5/8 in; 7/8 in | Wt. | 2.25 lb |
| Industrial Water Transfer Pump BE Pressure 3" Commercial water transfer pump was built to move large volumes of water while smooth running and long lasting. Used for draining a pool, Irrigating lawn, filling or emptying resevoirs, emptying a flooded basement and much more in no time. Our pump has a 3-Inch MNPT intake & 3-inch outlet connection. It is run by a strong Honda GX200 engine and has a max flow of 264 GPM. Discharge Hose Kits Sold Seperately.- GX200 Honda Engine (6.5)
- Recoil Start
- Fuel Tank Capacity, 0.82. GAL. (3.1L)
- 3" Intake Connection MNPT
- 3" Outlet Connection MNPT
- 264 GPM
- Centrifugal Aluminum Pump
- Heavy Duty Cast Iron Impeller
- 1 Year Pump Warranty
- 3 Year Engine Warranty
Product Specifications- BRAND:BE Pressure
- MANUFACTURERS PART NUMBER:WP-3065HL
- TYPE: Water Pump
- DISCHARGE HEAD FEET: 106
- INLET CONNECTION INCHES: 3
- MAXIMUM DIAMETER SOLIDS INCHES: No Solids
- IMPELLER MATERIAL: Heavy Duty Cast Iron
- HORSEPOWER: 6-1/2
- FUEL TANK CAPACITY GALLONS: 0.82
- GALLONS PER MINUTE: 265
- SUCTION/DRAW HEAD FEET: 26
- DISCHARGE CONNECTION TYPE: MNPT
- ENGINE: Honda GX200 160CC
- FUEL TYPE: Gasoline
- INLET CONNECTION TYPEMNPT
- STYLE: Water
- DISCHARGE CONNECTION SIZE INCHES: 3
- MODEL: 300846
| 2-inch Honda Water Pump FeaturesWater Pump 2 Inch Intake/Outlet 6.5 HP Honda Engine This 2-inch Honda Water Pump has an automatic low oil shutdown guard. Heavy-duty, corrosive-resistant seals. Durable cast iron impeller.Product Specifications- BRAND: BE Pressure
- MANUFACTURERS PART NUMBER: WP-2065HL
- TYPE: Water Pump
- DISCHARGE HEAD FEET: 105
- INLET CONNECTION INCHES: 2
- MAXIMUM DIAMETER SOLIDS INCHES: No Solids
- IMPELLER MATERIAL: Heavy Duty Cast Iron
- HORSEPOWER: 6-1/2
- CAPACITY GALLONS: 0.82
- FUEL TANK CAPACITY GALLONS: 0.82
- GALLONS PER MINUTE: 150
- SUCTION/DRAW HEAD FEET: 26
- DISCHARGE CONNECTION TYPE: MNPT
- ENGINE: Honda GX200 196CC
- INLET CONNECTION TYPE: MNPT
- STYLE: Water
- DISCHARGE CONNECTION SIZE INCHES: 2
- MODEL:300843
| Product Specifications BRAND: Flotec MANUFACTURERS PART NUMBER: FP5172-08 LENGTH INCHE: 21.813 WIDTH INCHES: 12.5 HEIGHT INCHES: 13.125 WEIGHT LBS: 34.1 COLOR FINISH: Black CONSTRUCTION: Thermoplastic SHAFT SEAL CONSTRUCTION: Silicone Carbide AMPS: 15/20 HERTZ: 60 PHASE: 1 VOLTAGE: 230/115 HORSEPOWER: 1-1/2 GALLONS PER MINUTE: 67 SUCTION/DRAW HEAD FEET: 25 CORD LENGTH FEET: 10 DISCHARGE CONNECTION TYPE: NPT SWITCH TYPE–-- INCLUDES: Threaded Ports For Pressure Gauge DISCHARGE CONNECTION SIZE INCHES: 1-1/2 WARRANTY: 1 Year Limited | Flotec Thermoplastic Sprinkler Pump 1 HP Corrosion-resistant, self priming sprinkler pumps are constructed of rugged, heavy-duty fiberglass-reinforced thermoplastic and capable of operating up to 30 sprinkler heads. Key Features:- Superior performance at depths to water of 20' or less
- Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
- Ready-to-install 230 volt motor (dual voltage)
- Self-priming after pump housing is initially filled (Check Valve or Foot Valve required)
Product Specifications- BRAND:Flotec
- MANUFACTURERS PART NUMBER: FP5162-08
- LENGTH INCHE:22
- WIDTH INCHES: 12.313
- HEIGHT INCHES: 13.125
- WEIGHT LBS: 30.6
- COLOR FINISH: Black
- CONSTRUCTION: Thermoplastic
- SHAFT SEAL CONSTRUCTION: Silicone Carbide
- AMPS: 15/20
- HERTZ: 60
- PHASE: 1
- VOLTAGE: 230/115
- HORSEPOWER: 1
- GALLONS PER MINUTE: 55
- SUCTION/DRAW HEAD FEET: 25
- CORD LENGTH FEET: 10
- DISCHARGE CONNECTION TYPE: NPT
- SWITCH TYPE--
- INCLUDES: Threaded Ports For Pressure Gauge
- DISCHARGE CONNECTION SIZE INCHES: 1-1/2
- WARRANTY: 1 Year Limited
| TP 4013HM Features The TP 4013HM is powered by reliable Honda engines with automatic low oil shut down guards. Heavy-duty self-priming pumps. Corrosive resistant seals. Durable cast iron impeller 4" TRASH Pump:- 389cc Honda GX390 Engine
- Recoil start & Low oil alert
- Fuel tank capacity 1.8 Gal. (6.1L)
- 4" Intake connection MNPT
- 4" OUTLET CONNECTION MNPT
- 580 GPM max flow
- Up to 1" solids
- 95' TOTAL Lift
- 26' SUCTION Lift
Product Specifications- BRAND: BE Pressure
- MANUFACTURERS PART NUMBERTP-4013HM
- TYPE: Trash Pump
- DISCHARGE HEAD FEET: 95
- INLET CONNECTION INCHES: 4
- MAXIMUM DIAMETER SOLIDS INCHES: 1
- HORSEPOWER: 13
- FUEL TANK CAPACITY GALLONS: 1.8
- GALLONS PER MINUTE: 580
- SUCTION/DRAW HEAD FEET: 26
- DISCHARGE CONNECTION TYPEM: NPT
- ENGINE: Honda GX390 389CC
- INLET CONNECTION TYPE: MNPT
- STYLE: Trash
- DISCHARGE CONNECTION SIZE INCHES: 4
|
Reviews
There are no reviews yet.