Content | Cardboard Corrugated Boxes 8" x 6" x 4" 200#/ECT-32 - 25 Pack Quality standard strength industrial Corrugated Boxes.- Manufactured from 200#/ECT-32 kraft corrugated
- Cartons are sold in bundle quantities of 25 and ship flat to save on storage space and shipping
Product Specifications- BRAND: Approved Vendor
- INSIDE LENGTH INCHES: 8
- INSIDE WIDTH INCHES: 6
- INSIDE HEIGHT INCHES: 4
- COLOR FINISH: Kraft
- MATERIAL: C Flute
- PACKAGE QUANTITY: 25
- BOX STYLE: Regular Slotted
- WALL TYPE: Single
- TYPE: Corrugated Boxes – Best Value
- STRENGTH: 200# / ECT-32
- WEIGHT CAPACITY: 65 lbs
| Devcon 5 Minute® Epoxies Product Details: Rapid-curing, general-purpose adhesive/encapsulant
Bonds rigid, durable substrates, including glass, metal, ceramics, concrete and wood.
Forms a clear, hard bond self-leveling liquid in minutes
100% reactive, no solvents
Easily dispenses and mixes in seconds
Dries in 15 minutes, reaches functional strength in 1 hour
Good solvent resistance Testing and Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure; Cured hardness tested according to ASTM D-2240; Cured density tested according to ASTM D1002; Compression strength tested according to ASTM D695; Dielectric strength tested according to ASTM D149Specifications | Adhesive Tensile Shear | 1,400 psi | Applicable Materials | Most Metals; Fabric; Ceramic; Glass; Concrete; Woo | Applications | Multi-Purpose | Big Catalog Page# | 2012:167 | Brand | DEVCON | Capacity Vol. [Nom] | 25 mL | Chemical Compound | Epoxy | Color | Light Amber | Country of Origin | US | Dielectric Strength | 490 V/mil | Fix Cure Time @ Temp. | 1 h @ 75 °F | Full Cure Time @ Temp. | 16 min @ 75 °F | Gap Fill [Nom] | 1/4 in | Hardness [Nom] | 85 Shore D | Hazmat | NO | MPI Catalog | YES | MPI Catalog Page# | 2021:56 | ORMD | NO | Packing Type | Dev-Tube™ | Prop 65 | NO | Resistance | Kerosene; Sulfuric Acid-10%; Toluene; Hydrochloric | Special Order | NO | Temp. Range [Max] | 200 °F | Temp. Range [Min] | -40 °F | UNSPSC | 31201600 | Viscosity [Nom] | 10,000 cP | Working Time [Max] | 6 min | Working Time [Min] | 3 min | Working Time [Nom] | 3-6 min | Wt. | 0.17 lb |
| Nashua® Multi-Purpose Duct Tapes Product Details: Adheres to a wide variety of surfaces
Conforms well to irregular surfaces
Tears straight, hangs straight, curl resistant
Easy unwindSpecifications | Adhesion to Steel | 40 oz/in | Brand | NASHUA | Color | Silver | Country of Origin | US | Hazmat | NO | Length [Nom] | 60 yd | MPI Catalog | YES | MPI Catalog Page# | 2021:73 | ORMD | NO | Packing Type | Roll | Prop 65 | NO | Series | 394 | Special Order | NO | Temp. Range [Max] | 200 °F | Tensile Strength [Nom] | 19 lb/in | Thickness [Nom] | 8.5 mil | Type | Versatile Performance | Width [Nom] | 2 in | Wt. | 1.59 lb |
| Loctite® 495TM Super Bonder® Instant Adhesive Product Details: Designed to bond rubber, metal, and plastic parts
Bonds gaps up to .004"
Easy to dispense and use
Cures rapidly at room temperature without requiring heat or light Testing and Approvals: Commercial Item Standard A-A-3097; American Bureau of ShippingSpecifications | Applicable Materials | Plastic; Most Metals; Rubber | Applications | Multi-Purpose | Big Catalog Page# | 2012:179 | Brand | LOCTITE | Capacity Vol. [Nom] | 1 oz | Chemical Compound | Cyanoacrylate | Color | Clear | Country of Origin | US | Fix Cure Time @ Temp. | 20 s @ 77 °F | Full Cure Time @ Temp. | 24 h @ 77 °F | Gap Fill [Nom] | 0.004 in | Hazmat | NO | MPI Catalog | NO | MPI Catalog Page# | 2018:37 | ORMD | NO | Packing Type | Bottle | Prop 65 | NO | Special Order | NO | Temp. Range [Max] | 180 °F | Temp. Range [Min] | -65 °F | Tensile Strength [Nom] | 2,750 psi | UNSPSC | 31201600 | Viscosity [Nom] | 45 cP | Working Time [Min] | 15 sec | Working Time [Nom] | 15 sec | Wt. | 0.1 lb |
| Flotec Thermoplastic Sprinkler Pump 1 HP Corrosion-resistant, self priming sprinkler pumps are constructed of rugged, heavy-duty fiberglass-reinforced thermoplastic and capable of operating up to 30 sprinkler heads. Key Features:- Superior performance at depths to water of 20' or less
- Fiberglass-reinforced thermoplastic pump housing for the highest corrosion resistance
- Ready-to-install 230 volt motor (dual voltage)
- Self-priming after pump housing is initially filled (Check Valve or Foot Valve required)
Product Specifications- BRAND:Flotec
- MANUFACTURERS PART NUMBER: FP5162-08
- LENGTH INCHE:22
- WIDTH INCHES: 12.313
- HEIGHT INCHES: 13.125
- WEIGHT LBS: 30.6
- COLOR FINISH: Black
- CONSTRUCTION: Thermoplastic
- SHAFT SEAL CONSTRUCTION: Silicone Carbide
- AMPS: 15/20
- HERTZ: 60
- PHASE: 1
- VOLTAGE: 230/115
- HORSEPOWER: 1
- GALLONS PER MINUTE: 55
- SUCTION/DRAW HEAD FEET: 25
- CORD LENGTH FEET: 10
- DISCHARGE CONNECTION TYPE: NPT
- SWITCH TYPE--
- INCLUDES: Threaded Ports For Pressure Gauge
- DISCHARGE CONNECTION SIZE INCHES: 1-1/2
- WARRANTY: 1 Year Limited
| TP 4013HM Features The TP 4013HM is powered by reliable Honda engines with automatic low oil shut down guards. Heavy-duty self-priming pumps. Corrosive resistant seals. Durable cast iron impeller 4" TRASH Pump:- 389cc Honda GX390 Engine
- Recoil start & Low oil alert
- Fuel tank capacity 1.8 Gal. (6.1L)
- 4" Intake connection MNPT
- 4" OUTLET CONNECTION MNPT
- 580 GPM max flow
- Up to 1" solids
- 95' TOTAL Lift
- 26' SUCTION Lift
Product Specifications- BRAND: BE Pressure
- MANUFACTURERS PART NUMBERTP-4013HM
- TYPE: Trash Pump
- DISCHARGE HEAD FEET: 95
- INLET CONNECTION INCHES: 4
- MAXIMUM DIAMETER SOLIDS INCHES: 1
- HORSEPOWER: 13
- FUEL TANK CAPACITY GALLONS: 1.8
- GALLONS PER MINUTE: 580
- SUCTION/DRAW HEAD FEET: 26
- DISCHARGE CONNECTION TYPEM: NPT
- ENGINE: Honda GX390 389CC
- INLET CONNECTION TYPE: MNPT
- STYLE: Trash
- DISCHARGE CONNECTION SIZE INCHES: 4
|
Reviews
There are no reviews yet.