Content | 2-inch Honda Water Pump FeaturesWater Pump 2 Inch Intake/Outlet 6.5 HP Honda Engine This 2-inch Honda Water Pump has an automatic low oil shutdown guard. Heavy-duty, corrosive-resistant seals. Durable cast iron impeller.Product Specifications- BRAND: BE Pressure
- MANUFACTURERS PART NUMBER: WP-2065HL
- TYPE: Water Pump
- DISCHARGE HEAD FEET: 105
- INLET CONNECTION INCHES: 2
- MAXIMUM DIAMETER SOLIDS INCHES: No Solids
- IMPELLER MATERIAL: Heavy Duty Cast Iron
- HORSEPOWER: 6-1/2
- CAPACITY GALLONS: 0.82
- FUEL TANK CAPACITY GALLONS: 0.82
- GALLONS PER MINUTE: 150
- SUCTION/DRAW HEAD FEET: 26
- DISCHARGE CONNECTION TYPE: MNPT
- ENGINE: Honda GX200 196CC
- INLET CONNECTION TYPE: MNPT
- STYLE: Water
- DISCHARGE CONNECTION SIZE INCHES: 2
- MODEL:300843
| Wheelchair Ramp, Single Fold, 3 Ft.PVI Wheelchair Ramps are made of lightweight aluminum. High-traction surface prevents slipping or skidding, even if it's raining! A standard 4' wheelchair ramp weighs 45 lbs. The new 4' PVI ramp weights only 17 lbs. - yet both support 600 lbs. Folds into a neat package with a carry handle. Stores easily in the trunk of most cars, just like a suitcase. | Krowne - Royal Series Service Faucet 16-127 Features:- Krowne Royal Series Service Faucet
- Splash-Mounted
- 8" Centers
- 6-1/2" Long Heavy Cast Spout w/Bail Hook and Hose Thread
- Bracket Can Mount Above Or Below
- Vacuum Breaker
- Rough Brass
- NSF and CSA Compliant (Best)
Product Specifications- COLOR FINISH: Chrome
- CONSTRUCTION: Brass
- GALLONS PER MINUTE: 2
| A typical Zurn Floor Drain can be installed in most floor construction. The drain pipe is run to an elevation below the expected finished floor level, so that the drain top will be flush with (or slightly below) the finished floor. The drain body is secured to the pipe with any of four connections -threaded, no-hub, inside caulk, or the Zurn Neo-Loc. Product Specifications- COLOR FINISH: Brass
- NOMINAL SIZE INCHES: 6 Dia.
| Product Specifications- LENGTH INCHES: 7-5/16
- WIDTH INCHES: --
- HEIGHT INCHES:--
- COLOR FINISH: Chrome
- CONSTRUCTION: Stainless Steel Body,Strainer; O.D. Chrome Plated Brass Tailpiece
- DIAMETER INCHES: 3-1/2
| Devcon 5 Minute® Epoxies Product Details: Rapid-curing, general-purpose adhesive/encapsulant
Bonds rigid, durable substrates, including glass, metal, ceramics, concrete and wood.
Forms a clear, hard bond self-leveling liquid in minutes
100% reactive, no solvents
Easily dispenses and mixes in seconds
Dries in 15 minutes, reaches functional strength in 1 hour
Good solvent resistance Testing and Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure; Cured hardness tested according to ASTM D-2240; Cured density tested according to ASTM D1002; Compression strength tested according to ASTM D695; Dielectric strength tested according to ASTM D149Specifications | Adhesive Tensile Shear | 1,400 psi | Applicable Materials | Most Metals; Fabric; Ceramic; Glass; Concrete; Woo | Applications | Multi-Purpose | Big Catalog Page# | 2012:167 | Brand | DEVCON | Capacity Vol. [Nom] | 25 mL | Chemical Compound | Epoxy | Color | Light Amber | Country of Origin | US | Dielectric Strength | 490 V/mil | Fix Cure Time @ Temp. | 1 h @ 75 °F | Full Cure Time @ Temp. | 16 min @ 75 °F | Gap Fill [Nom] | 1/4 in | Hardness [Nom] | 85 Shore D | Hazmat | NO | MPI Catalog | YES | MPI Catalog Page# | 2021:56 | ORMD | NO | Packing Type | Dev-Tube™ | Prop 65 | NO | Resistance | Kerosene; Sulfuric Acid-10%; Toluene; Hydrochloric | Special Order | NO | Temp. Range [Max] | 200 °F | Temp. Range [Min] | -40 °F | UNSPSC | 31201600 | Viscosity [Nom] | 10,000 cP | Working Time [Max] | 6 min | Working Time [Min] | 3 min | Working Time [Nom] | 3-6 min | Wt. | 0.17 lb |
|
Reviews
There are no reviews yet.